Explore the detailed walkthrough of a construction plan for a terrace roof, focusing on its design elements, symbols, and structural specifics. Learn more about how these plans communicate important information to contractors, including measurements, layout, and references to additional details.
Key Insights
- The article provides a detailed examination of a construction plan for a terrace roof, which includes standard mounting walls, French doors, and a circular terrace with a radius of 24.6 feet.
- The construction plans utilize symbols and numbering systems (e.g., 2D7.2, 3D7.2) to refer to images or details on different sheets, aiding in interpreting the design and revealing the intricate cut through the roof area.
- The plans anchor dimensions and measurements to existing locations in the structure, such as the living room and kitchen, to provide precise guidelines for the contractors, ensuring accurate construction.
44—Plano de Piso—La Terraza Now what I would like to do is look outside on the roof. So I'm going to get closer to the roof area. You can see that I have my standard boundary walls here.
So you can see their standard mounts. They have the shadow on them. You can see that I have French doors that open to the roof.
Here you can see that I have two symbols, one says 2D7.2, and another 3D7.2. What it means is that you go to the sheet of 7.2, refer to image 2 or image 3. And you can see the cut through the roof in this section. If you look, there is a thick line at the end of the detail call-out. We have construction sections, as well as detail call-outs.
And these are areas extracted from specific components in the building. So you can see that on the 7.2 page, I have images 2,3, and 4. So these are, again, detailed cuts passing through the parapet and the railing of the roof on the building’s side. It says, refer to that page and examine these images for further details. Another thing we have is that you can see that I have a discontinuous line here.
Here is the line representing the garage area below. And I have another line here that is showing the line indicating the roof above. One thing that is also happening is that you can see that the terrace is circular.
%20(1).png)
Learn Blueprint Reading
- Nationally accredited
- Create your own portfolio
- Free student software
- Learn at your convenience
- Authorized Autodesk training center
You can see that the terrace has a radius of 24.6 feet measured from this point in the living room. So, what we have done to tell the contractor is that we have said, here is the radius of the terrace. We have already marked the center of the platform measurement.
And we have fixed those dimensions to specific locations in the structure that already exists in the building. We have the living room, we have the kitchen, we have the platform, I have the continuous platform here. And again, in this area, I show once again references to other details located elsewhere in the set.